下载软件
proftpd-1.2.9.tar.gz
proftpd-mod-quotatab-1.2.11.tar.gz
注：proftpd-1.2.10版本后就不需要proftpd-modquotatab了
步骤如下：
代码:
¢
vi /etc/ld.so.conf
添加：/usr/local/mysql/lib
tar zvxf proftpd-1.2.9.tar.gz
tar zvxf proftpd-mod-quotatab-1.2.11.tar.gz
cp mod_quotatab/*.c proftpd-1.2.9/contrib/
cp mod_quotatab/*.h proftpd-1.2.9/contrib/
vi proftpd-1.2.9/contrib/mod_sql_mysql.c
#include</usr/local/mysql/include/mysql/mysql.h>
修改mysql.h的实际路径
cd proftpd-1.2.9
./configure \--prefix=/usr/local/proftpd \--with-modules=mod_sql:mod_sql_mysql:mod_quotatab\:mod_quotatab_sql:mod_ratio \--with-includes=/usr/local/mysql/include \--with-libraries=/usr/local/mysql/lib
make
make install
cp proftpd-1.2.9/contrib/dist/rpm/proftpd.init.d /etc/rc.d/init.d/proftpd
vi /etc/rc.d/init.d/proftpd
修改：PATH="$PATH:/usr/local/proftpd/sbin"
chmod 755 /etc/rc.d/init.d/proftpd
chkconfig --level 3 proftpd on
groupadd -g 5500 ftpgroup
adduser -u 5500 -s /bin/false -d /bin/null -c "proftpd user" -g ftpgroup ftpuser
然后配置你的Proftpd.conf
最后就是启动啦。/usr/local/proftpd/sbin/proftpd
-------------------------------Proftpd.conf----------------------------------
代码:
# This is a basic ProFTPD configuration file (rename it to
# ''''proftpd.conf'''' for actual use. It establishes a single server
# and a single anonymous login. It assumes that you have a user/group
# "nobody" and "ftp" for normal operation and anon.
ServerName "ltsnet"
ServerType standalone
DefaultServer on
# Port 21 is the standard FTP port.
Port 21
# Umask 022 is a good standard umask to prevent new dirs and files
# from being group and world writable.
Umask 022
# To prevent DoS attacks, set the maximum number of child processes
# to 30. If you need to allow more than 30 concurrent connections
# at once, simply increase this value. Note that this ONLY works
# in standalone mode, in inetd mode you should use an inetd server
# that allows you to limit maximum number of processes per service
# (such as xinetd).
MaxInstances 30
# Set the user and group under which the server will run.
User nobody
Group nobody
# To cause every FTP user to be "jailed" (chrooted) into their home
# directory, uncomment this line.
ServerIdent off
DisplayLogin welcome.msg
DefaultRoot ~
# Normally, we want files to be overwriteable.
<Directory />
AllowOverwrite on
</Directory>
# A basic anonymous configuration, no upload directories. If you do not
# want anonymous users, simply delete this entire <Anonymous> section.
<Anonymous /home/ftp>
User ftp
Group ftp
# We want clients to be able to login with "anonymous" as well as "ftp"
UserAlias anonymous ftp
# Limit the maximum number of anonymous logins
MaxClients 10
# We want ''''welcome.msg'''' displayed at login, and ''''.message'''' displayed
# in each newly chdired directory.
DisplayLogin welcome.msg
DisplayFirstChdir .message
# Limit WRITE everywhere in the anonymous chroot
<Limit WRITE>
DenyAll
</Limit>
</Anonymous>
SQLAuthTypes Backend Plaintext
SQLAuthenticate users* groups*
SQLConnectInfo ftpdb@localhost root 123456
SQLUserInfo ftpuser userid passwd uid gid homedir shell
SQLGroupInfo ftpgroup groupname gid members
SQLHomedirOnDemand on
SQLLog PASS updatecount
SQLNamedQuery updatecount UPDATE "count=count+1,accessed=now() WHERE userid=''''%u''''" ftpuser
SQLLog STOR,DELE modified
SQLNamedQuery modified UPDATE "modified=now() WHERE userid=''''%u''''" ftpuser
QuotaEngine on
QuotaDirectoryTally on
QuotaDisplayUnits Mb
QuotaShowQuotas on
QuotaLog "/var/log/quota"
SQLNamedQuery get-quota-limit SELECT "name, quota_type, per_session, limit_type, bytes_in_avail, bytes_out_avail, bytes_xfer_avail, files_in_avail, files_out_avail, files_xfer_avail FROM ftpquotalimits WHERE name = ''''%{0}'''' AND quota_type = ''''%{1}''''"
SQLNamedQuery get-quota-tally SELECT "name, quota_type, bytes_in_used, bytes_out_used, bytes_xfer_used, files_in_used, files_out_used, files_xfer_used FROM ftpquotatallies WHERE name = ''''%{0}'''' AND quota_type = ''''%{1}''''"
SQLNamedQuery update-quota-tally UPDATE "bytes_in_used = bytes_in_used + %{0}, bytes_out_used = bytes_out_used+ %{1}, bytes_xfer_used = bytes_xfer_used + %{2}, files_in_used = files_in_used + %{3}, files_out_used = files_out_used + %{4}, files_xfer_used = files_xfer_used + %{5} WHERE name = ''''%{6}'''' AND quota_type = ''''%{7}''''" ftpquotatallies
SQLNamedQuery insert-quota-tally INSERT "%{0}, %{1}, %{2}, %{3}, %{4}, %{5}, %{6}, %{7}" ftpquotatallies
QuotaLimitTable sql:/get-quota-limit
QuotaTallyTable sql:/get-quota-tally/update-quota-tally/insert-quota-tally
建ftpdb库,在phpMyAdmin中导入ftpdb.sql就ok。
--------------------------------------ftpdb.sql---------------------------------
代码:
# 表的结构 `ftpgroup`
#
CREATE TABLE `ftpgroup` (
`groupname` varchar(16) NOT NULL default '''''''',
`gid` smallint(6) NOT NULL default ''''5500'''',
`members` varchar(16) NOT NULL default '''''''',
KEY `groupname` (`groupname`)
) TYPE=MyISAM COMMENT=''''ProFTP group table'''';
#
# 导出表中的数据 `ftpgroup`
#
INSERT INTO `ftpgroup` VALUES (''''ftpgroup'''', 5500, ''''ftpuser'''');
# --------------------------------------------------------
#
# 表的结构 `ftpquotalimits`
#
CREATE TABLE `ftpquotalimits` (
`name` varchar(30) default NULL,
`quota_type` enum(''''user'''',''''group'''',''''class'''',''''all'''') NOT NULL default ''''user'''',
`per_session` enum(''''false'''',''''true'''') NOT NULL default ''''false'''',
`limit_type` enum(''''soft'''',''''hard'''') NOT NULL default ''''soft'''',
`bytes_in_avail` float NOT NULL default ''''0'''',
`bytes_out_avail` float NOT NULL default ''''0'''',
`bytes_xfer_avail` float NOT NULL default ''''0'''',
`files_in_avail` int(10) unsigned NOT NULL default ''''0'''',
`files_out_avail` int(10) unsigned NOT NULL default ''''0'''',
`files_xfer_avail` int(10) unsigned NOT NULL default ''''0''''
) TYPE=MyISAM;
#
# 导出表中的数据 `ftpquotalimits`
#
INSERT INTO `ftpquotalimits` VALUES (''''test'''', ''''user'''', ''''true'''', ''''hard'''', ''''9e+06'''', ''''2000'''', ''''9e+09'''', 2000, 2000, 2000);
# --------------------------------------------------------
#
# 表的结构 `ftpquotatallies`
#
CREATE TABLE `ftpquotatallies` (
`name` varchar(30) NOT NULL default '''''''',
`quota_type` enum(''''user'''',''''group'''',''''class'''',''''all'''') NOT NULL default ''''user'''',
`bytes_in_used` float NOT NULL default ''''0'''',
`bytes_out_used` float NOT NULL default ''''0'''',
`bytes_xfer_used` float NOT NULL default ''''0'''',
`files_in_used` int(10) unsigned NOT NULL default ''''0'''',
`files_out_used` int(10) unsigned NOT NULL default ''''0'''',
`files_xfer_used` int(10) unsigned NOT NULL default ''''0''''
) TYPE=MyISAM;
#
# 导出表中的数据 `ftpquotatallies`
#
INSERT INTO `ftpquotatallies` VALUES (''''test'''', ''''user'''', ''''2000'''', ''''2000'''', ''''2000'''', 2000, 2000, 2000);
# --------------------------------------------------------
#
# 表的结构 `ftpuser`
#
CREATE TABLE `ftpuser` (
`id` int(10) unsigned NOT NULL auto_increment,
`userid` varchar(32) NOT NULL default '''''''',
`passwd` varchar(32) NOT NULL default '''''''',
`uid` smallint(6) NOT NULL default ''''5500'''',
`gid` smallint(6) NOT NULL default ''''5500'''',
`homedir` varchar(255) NOT NULL default '''''''',
`shell` varchar(16) NOT NULL default ''''/sbin/nologin'''',
`count` int(11) NOT NULL default ''''0'''',
`accessed` datetime NOT NULL default ''''0000-00-00 00:00:00'''',
`modified` datetime NOT NULL default ''''0000-00-00 00:00:00'''',
PRIMARY KEY (`id`)
) TYPE=MyISAM COMMENT=''''ProFTP user table'''' AUTO_INCREMENT=3 ;
#
# 导出表中的数据 `ftpuser`
#
INSERT INTO `ftpuser` VALUES (1, ''''test'''', ''''123456'''', 5500, 5500, ''''/home/test'''', ''''/sbin/nologin'''', 36, ''''2004-09-28 13:07:41'''', ''''2004-09-28 13:07:42'''');
quotalimits表
代码:
name： - 用户帐号
quota type： - user, group, class, all (we use user)
per_session： - true or false (we use true)
limit_type： - 硬限制 or 软限制 (我们一般用硬限制)
bytes_in_avail： - 允许上传的字节数
bytes_out_avail： - [1] [2] 下一页 |
