环境 Cisco router 问题 Some emergency situation is the console port is broken and we can try to access the router by some other ways. 解答 When the console is good or you can access the router normaly. You should set the password on the aux port or on the vty line.
Of course you should remember the enable secret password. If the console broken occur, you can try to telnet the router OR you can put the console line into the aux port when the router has been fully bootup. And you can type the 'Enter' and input the aux access password and access to the user mode of the router.
If possible, do the replace of the parts later.
没有相关教程
注：本站部分文章源于互联网，版权归原作者所有！如有侵权，请原作者与本站联系，本站将立即删除！ 本站文章除特别注明外均可转载，但需注明出处！ [MinTao学以致用网] 
