|
s called by a TButton. However, this makes it troublesome to call the same event handler from a corresponding menu item because the menu item will cause an error each time it calls the event handler.
The Sample Application''''s Framework
The sample application provides the framework for a modular, easily-extendible application. It also demonstrates how to make the simple Sender parameter do a lot of high-powered work, and shows how to get around some of the limitations mentioned earlier.
Most applications contain menu items and buttons that perform the same action. Delphi makes it simple to do this by routing multiple events to a shared event handler. If multiple buttons and menu items all use the same event handler, it''''s simple to determine which control called the procedure. However, it becomes more difficult to determine, say, which menu item corresponds to the calling event if the control was actually a button. The user may obviously find that the Word Wrap button and the Word Wrap menu command are synonymous in functionality. However, to have Delphi understand this and update the menu item''''s Checked property - regardless of which control was the Sender - takes some special programming.
The sample application contains four SpeedButtons, as well as main and pop-up menu items that correspond to each (see Figure 2). The buttons and menu items each perform similar functions, in this case, using a database to track the amount of time spent on each of a number of tasks. Program users can configure any number of tasks, all of which call the same event handler. (For the sake of clarity, the sample application illustrates only the Sender functions.)
Figure 2: The layout of the sample application''''s components.
While a task is active, its SpeedButton remains depressed. Pressing a depressed button releases it and ends the task. Pressing a button while another is depressed releases the first and depresses the new button, causing the timesheet database to be simultaneously updated. The trick, of course, is to handle a number of MenuItems and SpeedButtons all with one event handler. This technique enables the programmer to allow for any number of tasks without having to write a new handler for each.
Implementing this functionality requires one more ingredient: the Components property. Like Tag, Components is a property of TComponent, meaning that it''''s accessible to all components. Components is a property of every component, but in most cases it''''s only used on TForms. In this case, the Components property is an array of all components owned by the form.
Build It
To build the sample application, create a single form named Form1. Add four SpeedButtons (used here to easily allow two-state buttons), a Label, a MainMenu (with an item called File1 and four sub-items), and a pop-up menu (also with four menu items). Set the properties as shown in Figure 3.
SpeedButtons
Name/Caption
AllowAllUp
GroupIndex
Tag
OnClick event handler
SpeedButton1
True
1
1
SpeedButtonClick
SpeedButton2
True
1
2
SpeedButtonClick
SpeedButton3
True
1
3
SpeedButtonClick
SpeedButton4
True
1
4
SpeedButtonClick
MenuItems
Name/Caption
Tag
OnClick event handler
File1
0
--
MainItem1
1
SpeedButtonClick
MainItem2
2
SpeedButtonClick
MainItem3
3
SpeedButtonClick
MainItem4
4
SpeedButtonClick
PopupItem1
1
SpeedButtonClick
PopupItem2
2
SpeedButtonClick
PopupItem3
3
SpeedButtonClick
PopupItem4
4
SpeedButtonClick
Figure 3: Setting the values of properties for the sample application''''s SpeedButton and MenuItem components.
Note that all the buttons and menu items have the same event handler, namely SpeedButtonClick (see Figure 4). This procedure is called from any of the SpeedButtons or menu items on the form (except MenuItem File1). It references two external procedures, PushButton and ReleaseButton.
procedure TForm1.SpeedButtonClick(Sender: TObject);
var
A : Integer;
begin
if Sender is TSpeedButton then
if TSpeedButton(Sender).Down then
PushButton(Sender)
else
ReleaseButton(Sender)
else
for A := 0 to ComponentCount-1 do
if Components[A] is TSpeedButton then
with Components[A] as TSpeedButton do
if Tag = TComponent(Sender).Tag then
begin
Down := not Down;
if Down then
PushButton(Self.Components[A])
else
ReleaseButton(Self.Components[A]);
end;
end;
Figure 4: Referencing PushButton and ReleaseButton with the SpeedButtonClick procedure.
SpeedButtonClick first determines which object sent the event. If it''''s a TSpeedButton, it simply passes that object to the PushButton or ReleaseButton procedure, depending on the button''''s state (up or down). These procedures simply allow convenient spots for the messages to be handled. In the following example, the Caption of Label1 is set to report the event that occurred:
procedure TForm1.PushButton(Sender: TObject);
begin
Label1.Caption :=
TComponent(Sender).Name + '''' was clicked.'''';
end;
procedure TForm1.ReleaseButton(Sender: TObject);
begin
Label1.Caption :=
TCompone 上一页 [1] [2] [3] 下一页
[办公软件]在Excel中插入时间/日期TODAY和NOW函数 [网络安全]激活型触发式AutoRun.inf病毒和rose病毒的清除方案
[Web开发]asp.net c#其它语句之break、continue、goto实例介… [Web开发]一大堆常用的超强的正则表达式及RegularExpressio…
[平面设计]制作动态GIF图像的好帮手─Coffee GIf Animator [平面设计]功能超强的GIF动画制作软件─Ulead Gif Animator
[平面设计]AutoCAD常用快捷命令(外加中文说明) [平面设计]AutoCAD常用快捷命令(字母类,外加中文说明)
[平面设计]AutoCAD快捷命令介绍 [平面设计]多种方法解决AutoCAD打印时出现错误
| 
注：本站部分文章源于互联网，版权归原作者所有！如有侵权，请原作者与本站联系，本站将立即删除！ 本站文章除特别注明外均可转载，但需注明出处！ [MinTao学以致用网] 
